BTHHT - RELIACOR II ROSIN CORE SOLDER 0.032 5LB
- MSDS: BTHHT
- Manufacturer: ALPHA METALS INC
- Product Name: RELIACOR II ROSIN CORE SOLDER 0.032 5LB
- National Stock Number: 3439-00-781-2629
Product Identification
Product ID:RELIACOR II ROSIN CORE SOLDER 0.032 5LB
MSDS Date:07/19/1990
FSC:3439
NIIN:00-781-2629
MSDS Number: BTHHT
Responsible Party
JERSEY CITY, NJ 07304
US
Emergency Phone: 201-434-6778(CHEMTREC 800-424-9300)
Info Phone: 201-434-6778
Cage: EO354
Contractor
Telephone: 201-434-6778
Cage: 96613
Ingredients
TIN
CAS: 7440-31-5
RTECS: XP7320000
Fraction By Weight: 61.5%
OSHA PEL 2 MG/M3
ACGIH TLV: 2 MG/M3; 9394
LEAD (SARA III)
CAS: 7439-92-1
RTECS: OF7525000
Fraction By Weight: 37.5%
OSHA PEL SEE 1910.1025
ACGIH TLV: 0.15 MG/M3;DUST 9394
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
ANTIMONY (SARA III)
CAS: 7440-36-0
RTECS: CC4025000
Fraction By Weight: 0.5%
OSHA PEL 0.5 MG/M3
ACGIH TLV: 0.5 MG (SB)/M3; 9394
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
BISMUTH
CAS: 7440-69-9
RTECS: EB2600000
Fraction By Weight: 0.25%
COPPER (SARA III)
CAS: 7440-50-8
RTECS: GL5325000
Fraction By Weight: 0.08%
OSHA PEL 0.1MG/M3 FUME/1 DUST
ACGIH TLV: 0.2 MG/M3 FUME; 9394
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
ROSIN, TAKEN FROM QQ-S-571 TABLE
CAS: 8050-09-7
Fraction By Weight: 3.0%
SILVER (SARA III)
CAS: 7440-22-4
RTECS: VW3500000
OSHA PEL 0.01 MG/M3
ACGIH TLV: 0.1 MG/M3; 9394
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
INDIUM
CAS: 7440-74-6
RTECS: NL1050000
OSHA PEL 0.1 MG/M3
ACGIH TLV: 0.1 MG/M3; 9394
Hazards
LD50 LC50 Mixture:ROSIN: ORAL-RAT LD50 >5000 MG/KG
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHALATION OF ROSIN FUME MAY
CAUSE DIZZINESS OR HEADACHE, MAY ALSO CAUSE ALLERGIC REACTION.
FUMES MAY CAUSE EYE IRRITATION. SWALLOWING IS NOT EXPECTED TO BE A
HEALTH HAZARD (UNLIKELY TO OCCUR). MOLTEN SOLDER WILL CAUSE BURNS.
CHRONIC: PROLONGED OR REPEATED EXPOSURE MAY CAUSE SKIN RASH.
Explanation of Carcinogenicity:HMIS FOUND REFERENCE WHERE IARC LISTS
LEAD AS GROUP 3.
Effects of Overexposure:EYES: REDNESS, TEARING, BLURRED VISION,
DISCOMFORT. SKIN: BURNS (PAIN, BLISTERS, REDNESS), RASH (REDNESS,
ITCHING, DISCOMFORT). INHALED: COUGHING, DIZZINESS, HEADACHE, SORE
THROAT. INGESTED: NONE GIVE N.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHALED: REMOVE TO FRESH AIR. IF BREATHING IS DIFFICULT, GIVE
OXYGEN AND GET MEDICAL ATTENTION. EYES: IF BURNED, COOL WITH WATER
AND GET IMMEDIATE MEDICAL ATTENTION. IF FUME IRRITATED, REMOVE FROM
EXP OSURE. SKIN: FR BURNS, COOL WITH WATER AND GET MEDICAL
ATTENTION. FOR RASH, REMOVE FROM EXPOSURE AND GET MEDICAL AID.
INGESTED: CALL DOCTOR OR POISON CONTROL CENTER IMMEDIATELY.
Fire Fighting
Flash Point:NONE
Extinguishing Media:MEDIA APPROPRIATE FOR SURROUNDING FIRE.
Fire Fighting Procedures:WEAR SELF CONTAINED BREATHING APPARATUS WITH
FULL PROTECTIVE CLOTHING, IF INVOLVED IN FIRE.
Unusual Fire/Explosion Hazard:WHEN HEATED TO HIGH TEMPERATURES, LEAD
EMITS HIGHLY TOXIC FUMES.
Accidental Release
Spill Release Procedures:SOLID AT ROOM TEMPERATURE. IF MOLTEN, ALLOW TO
COOL AND SOLIDIFY; THEN SCRAPE UP.
Neutralizing Agent:NONE
Handling
Handling and Storage Precautions:NO SPECIAL REQUIREMENTS OF STORAGE.
Other Precautions:FOR INDUSTRIAL USE ONLY. READ ALL CONTAINER LABELING.
FOOD AND DRINK SHOULD NOT BE CONSUMED OR TOBACCO PRODUCTS USED, NOR
COSMETICS APPLIED IN AREAS WHERE SOLDERS MAY BE USED.
Exposure Controls
Respiratory Protection:IF ENGINEERING CONTROLS FAIL OR NON-ROUTINE USE
OR EMERGENCY OCCURS; USE NIOSH/MSHA APPROVED RESPIRATOR WITH
ORGANIC VAPOR CATRIDGE OR SCBA, AS REQUIRED. USE IN ACCORDANCE WITH
29 CFR 1910.134.
Ventilation:PROVIDE GENERAL OR LOCAL EXHAUST TO MAINTAIN EXPOSURES
BELOW TLV.
Protective Gloves:MFR:NONE HMIS:PROTECT FROM THERMAL BURNS
Eye Protection:GOGGLES OR FACE SHIELD
Other Protective Equipment:NONE NORMALLY NEEDED.
Work Hygienic Practices:WASH HANDS AFTER USE AND BEFORE EATING,
DRINKING, OR SMOKING. ALUNDER CONTAMINATED CLOTHES BEFORE REUSE.
Supplemental Safety and Health
MSDS IS FROM MFRS GENERIC DATA. INGREDIENTS ARE TAKEN FROM SPEC AND
MSDS. MANUFACTURER REFUSED TO GIVE % OF INGREDIENTS, THIS DATA FROM
DLSC-TIR.
Chemical Properties
HCC:N1
Solubility in Water:INSOLUBLE
Appearance and Odor:SILVER-GRAY METAL WIRE,ODORLESS
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, OXIDIZERS
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:CARBON MONOXIDE, ABIETIC ACID,
ALIPHATIC ALDEHYDES, DITERPENE ACIDS.
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. ALLOY PORTION IS RECLAIMABLE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.